Products of other enterprises
Technical characteristics
- BrandHOIST
Description
The 11T pump hoist with 33,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck.The 11T has all the features of the 10T except that it has higher load capacity winches.Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders.A guy cable is not needed in most situations.Designed to allow for easy access to hard-to-get-to pumps.Total pump hoist weight is approximately 7,000 lbs.A deck, headache rack and toolboxes add approximately 3,000 lbs.
Standard features:
- Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
- Capacity: 11,000 lbs. single line, 33,000 lbs. with 3 part line
- Mainline speed: 140 feet per minute
- Mainline cable: 5/8" X 150'
- The mainline spool is driven by 2 heavy duty pinion gears with the pinion shafts direct coupled to the hydraulic motors.Braking is accomplished with 2 Smeal automatic fail safe brakes.The winch drum has a cable storage section with enough drum width to spool a 3 part line on a bare drum.
- The tailout winch has a 2,500 lb. lifting capacity at 150 feet per minute and uses a fail-safe brake.Tailout cable: 3/8" x 125 ft.
- Line Block: Blocks for reeving a 2 part or 3 part line
- Hooks: 7 ton and 15 ton safety hooks
- PTO for standard transmission (PTO is available for an automatic at additional cost)
- Hydraulic pump: 3 stage gear pump
- The pump hoist is designed to mount on a deck
- Open frame design allows for full use of the deck area
- Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level
- Hydraulic bypass valves are incorporated to protect from overloading
- Rear hydraulic outriggers with holding valves
- Holding valve on mast cylinders
- White paint
Optional features:
- Sandline winch: The sandline winch can be switched between 7,000 lbs. bare spool lifting capacity with maximum speed of 200 feet per minute or 3,500 lbs. bare spool capacity with 400 feet per minute line speed.The sandline winch is power-up and power-down.Braking is accomplished with 2 automatic fail safe brakes.Spool capacity: 1,900 ft. of 1/2" cable, 2,500 ft. of 7/16" cable or 3,400 ft. of 3/8" cable.
- Electronic speed control
- Oil cooler
- Cathead
- Breakout wrench hydraulic cylinder
- Front hydraulic outrigger jacks
- Extended mast height
- Corded remote control
- Wireless remote control
- Tailgate
- Toolboxes
- Mast lights
- Walking beam
- Special paint colors
- Line-X spray-on bed liner
- Deck
- Headache rack
- Wire winder
- Power to the rear
- All other options are available on request
Contact the seller
11T Pump Hoist
We recommend to see